Spirit EL 5 Elliptical, EL 3 Elliptical owner manual EL3 /EL5 Elliptical

Page 33

10.Press the User 1 or User 2 key. The message window will show a welcome message. If you had previously saved a program the message will contain your name. Then press the Enter key to begin programming.

11.When you press enter, the message window will show ￿Name ￿ A￿, if there is no name saved. If the name ￿David￿ had been previously saved the message window will show ￿Name ￿ David￿ and the D will be blinking. If there is a name saved you can change it or you may press the Stop key to keep the name and continue to the next step. If you want to enter a name use the Up and/or the Down key to change the first letter then press Enter to save the first letter and continue to the next letter. When you have finished entering the name press the Stop key to save the name and continue to the next step.

12.The message window will ask you to enter your Age. You may enter your Age, using the Up and Down keys or the numeric key pad, then press the Enter key to accept the new number and proceed on to the next screen.

13.You are now asked to enter your Weight. You may adjust the Weight number using the Up and Down keys or the numeric key pad, then press enter to continue.

14.Next is Time. You may adjust the Time and press enter to continue.

15.Now you are asked to adjust the Max Level. This is the peak exertion level you will experience during the program. The factory setting is level seven. Adjust the level and then press enter.

16.Now the first column will be blinking and you are asked to adjust the level for the first segment of the workout. When you finish adjusting the first segment, or if you don￿t want to change, then press enter to continue to the next segment.

17.The next segment will show the same level as the previously adjusted segment. Repeat the same process as the last segment then press enter. Continue this process until all twenty segments have been set.

18.The message window will then tell you to press enter to save the program. After saving the program the message window says ￿New program saved￿ then will give you the option to Start or modify the program. Pressing Stop will exit to the start up screen.

19.If you want to increase or decrease the workload at any time during the program press the Up or Down key. This will only affect the workload for the present position in the profile. When the profile changes to the next column it will return to the preset work level.

20.During the User 1 or User 2 program you will be able to scroll through the data in the message window by pressing the Enter key.

32

EL3 /EL5 Elliptical

 

Image 33
Contents Elliptical Table of Contents Product Registration Important Safety Instructions Important Operation Instructions Important Electrical InformationStep Assembly Pack Check List EL3Step Tools Assembly Pack Check List EL5 Step Tools Unpacking the Unit Assembly InstructionsHandle BAR Assembly Power Connector Located on FRONT, Left Hand Side of Unit Assembly Drawing EL3 EL3 /EL5 Elliptical Assembly Drawing EL5 EL3 /EL5 Elliptical Transportation FeaturesOperation of Your Elliptical Getting familiar with the EL3 control panel Power upQuick Start mode Basic information and functionsProgramming the console Entering a program/Changing Settings Preset ProgramsManual Fat Burn ProgramsStrength CardioCustom User Defined Programs IntervalHeart Rate Control Program operation Getting familiar with the EL5 control panel Quick StartBasic information Entering/Changing Settings Hill Fat Burn Cardio Interval EL3 /EL5 Elliptical Heart Rate programs Rate of Perceived Exertion Erratic Operation Using a Heart Rate TransmitterHeart Rate Control Program 1 & 2 HR 1, HR 2 operation Maintenance Menu in console software MaintenanceElliptical Warranty Manufacturer’s Limited Warranty