THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been used and the total number of miles that the walk- ing belt has moved. The information mode also allows you to select miles or kilometers as the unit of mea- surement for speed and distance. In addition, the infor- mation mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown:
The Time display will show the total number of hours the treadmill has been used.
The Distance display will show the total number of miles (or kilometers) that the walking belt has moved.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill features a cushioning system that re- duces the impact as you walk or run on the treadmill. To increase the firmness of the walking platform, slide the cushion handles (only the right side is shown) to- ward the rear of the treadmill. To decrease the firm- ness, slide the cushion handles toward the front of the treadmill. Note: Make sure both handles are set at the same cushion level. The faster you run on the treadmill, or the more you weigh, the firmer the walking platform should be.
Decrease |
Increase |
Cushion Handle |
THE OPTIONAL CHEST PULSE SENSOR
An “E” for English miles or | An optional chest pulse sensor provides | |
an “M” for metric kilometers | ||
operation as it continuously monitors your heart rate. | ||
will appear in the Speed dis- | ||
To purchase the optional chest pulse sensor, call | ||
play. Press the Speed in- | ||
crease button to change the |
| |
unit of measurement. |
|
IMPORTANT: The Calories display should be blank. If
a “d” appears in the display, the console is in the “demo”
mode. This mode is intended to be used only when a
treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a “d” appears in the Calories dis- play when the information mode is selected, press the Speed – button so the display is blank.
To exit the information mode, remove the key from the console.
25