Gold's Gym CWTL05607.0 manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive

cleaner. Assembly requires the included hex key and your own Phillips screwdriver .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

#8 x 1" Tek Screw

#8 x 3/4" Screw (3)–2

3/8" x 1" Bolt

5/16" x 1" Bolt (64)–4

(83)–4

 

 

(106)–2

 

 

 

 

5/16" x 2 1/4" Bolt (65)–4

5/16" Star Washer

1/4" Flat Washer

3/8" Star

 

 

(8)–4

(102)–4

Washer (23)–8

 

 

 

 

 

3/8" x 2 3/4" Bolt (105)–2

Extension Leg Nut (67)–4

 

1/4" x 4 1/2" Bolt (103)–4

 

1. Make sure that the power cord is unplugged.

1

77

 

 

 

 

 

 

With the help of a second person, carefully tip

 

Wire Tie

 

 

 

108

the treadmill onto its left side. Partially fold the

 

 

Frame (58) so that the treadmill is more stable;

 

 

 

do not fully fold the Frame yet.

 

107

 

 

 

 

Identify the Right Upright (107), and hold it near

 

 

77

the Base (108) at the angle shown.

 

58

 

 

 

 

See the inset drawing. Tie the wire tie in the

 

 

 

Right Upright (107) securely around the end of

 

 

 

the Upright Wire (77). Then, pull the other end

 

 

 

of the wire tie until the Upright Wire is routed

 

 

 

completely through the Right Upright. Make

 

 

 

sure that the Upright Wire does not fall into

 

 

Wire

the Right Upright.

 

 

 

77

Tie

 

 

 

 

 

 

6

 

 

Image 6
Contents QUESTIONS? Model No. CWTL05607.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Be careful not to pinch the Upright Wire Tighten the Bolts yetNot Connected PROPERLY, the CON Sole MAY be Damaged WhenTo overtighten the Bolts Top ViewPage Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleChange the incline of the treadmill as desired Follow your progress with the displayMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Cross Trainer Workout Select one of the six cross trainer workoutsPress the Start button to start the workout Perform the first strength exercise when prompted Continue the cross trainer workoutHOW to USE a Distance Workout Select a distance workoutHOW to USE a Preset Workout Information Mode HOW to Adjust the Cushioning System Optional Chest Pulse SensorHOW to USE the Upper Body Arms HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopPage Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0208A Qty DescriptionDescription Exploded Drawing A-Model No. CWTL05607.0 R0208A Exploded Drawing B-Model No. CWTL05607.0 R0208A Exploded Drawing C-Model No. CWTL05607.0 R0208A Exploded Drawing D-Model No. CWTL05607.0 R0208A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT