Healthrider HRT15920 manual HOW to Connect Your Home Stereo, HOW to Connect Your Computer

Page 18

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the LINE OUT jack on your stereo.

A

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

 

LINE OUT

Audio

Adapter

 

Cable

 

 

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the LINE OUT jack on your stereo.

B

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

 

RCA Y-adapter

Audio

Adapter

Cable

Wire removed from

 

LINE OUT jack

 

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.

A

LINE OUT

Audio

Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into a 3.5mm Y-adapter (available at electronics stores). Plug the Y-adapter into the PHONES jack on your computer. Plug your headphones or speakers into the other side of the Y-adapter.

B

 

 

PHONES

Audio

3.5mm

Cable

Y-adapter

Headphones/Speakers

18

Image 18
Contents QUESTIONS? Model No. HRT15920 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin BackRight Side Assembly Make sure that no wires are pinched. See step Turn the Receiver B so the cylinder is on the sideHOW to Plug in the Power Cord Treadmill OperationPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeRemoved, the console is in the demo mode When you are finished exercising, removeAdjust the incline of the treadmill to the lowest See page 22 and turn off the demo modeHOW to USE Preset Workout Programs Select one of the preset workout programsPut on the chest pulse sensor HOW to USE Heart Rate ProgramsFollow your progress with the displays Select a heart rate programEnter your age and a maximum speed setting HOW to Create Custom Programs HOW to USE Custom Programs When the program has ended, remove the keyHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerInsert the key into the console HOW to Connect Your VCRAudio Adapter Cable PressVCR. the Play button on your CD player orMeasure your heart rate, if desired Whenkey. the program is completed, removeReturn to the treadmill and stand on the foot HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Follow your progress with the LED track DisplaysInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting ProblemsolutionMagnet and the Reed Switch is about Walking belt is off-center or slips when walked onPlug the Power CORD. Next, remove Displays of the console do not func- tion properlyWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page R1202B Qty DescriptionHOW to Order Replacement Parts Part Identification ChartUse the chart below to identify small parts during assembly Exploded DRAWING-Model No. HRT15920 Model No. HRT15920 Limited Warranty