Healthrider HRT15920 manual Troubleshooting, Problemsolution

Page 25

TROUBLESHOOTING

Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEMSOLUTION

1.The power does not turn on

a.Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. Important: The treadmill is not compatible with GFCI-equipped outlets.

b.Make sure that the key is fully inserted into the console.

c.Check the circuit breaker located on the frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

c

Tripped Reset

2.The power turns off during use

a.Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, un- plug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console and then reinsert it.

3. The walking belt

a. Use only a single-outlet surge suppressor that meets all of the specifications de-

slows when walked

scribed on page 8.

 

 

on

 

 

 

 

b. If the walking belt is overtightened, tread-

b

 

 

mill performance may decrease and the

3–4”

 

walking belt may be permanently dam-

 

 

 

aged. Remove the key and UNPLUG THE

 

 

 

POWER CORD. Using the included allen

 

 

 

wrench, turn both rear roller adjustment

 

 

 

bolts counterclockwise 1/4 of a turn. When

 

 

 

the walking belt is properly tightened, you

 

 

 

should be able to lift the edges of the

Rear Roller Adjustment Bolts

 

walking belt 3 to 4 inches off the walking

 

 

 

 

platform. Be careful to keep the walking

 

 

 

belt centered. Plug in the power cord, insert the key and run the treadmill for a few

 

minutes. Repeat until the walking belt is properly tightened.

 

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model No. HRT15920 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly Turn the Receiver B so the cylinder is on the side Make sure that no wires are pinched. See stepTreadmill Operation HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerAdjust the incline of the treadmill to the lowest When you are finished exercising, removeRemoved, the console is in the demo mode See page 22 and turn off the demo modeSelect one of the preset workout programs HOW to USE Preset Workout ProgramsFollow your progress with the displays HOW to USE Heart Rate ProgramsPut on the chest pulse sensor Select a heart rate programEnter your age and a maximum speed setting HOW to Create Custom Programs When the program has ended, remove the key HOW to USE Custom ProgramsHOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRInsert the key into the console PressVCR. the Play button on your CD player orWhenkey. the program is completed, remove Measure your heart rate, if desiredFollow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Follow your progress with the LED track DisplaysOptional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problemsolution TroubleshootingPlug the Power CORD. Next, remove Walking belt is off-center or slips when walked onMagnet and the Reed Switch is about Displays of the console do not func- tion properlyExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Page Qty Description R1202BPart Identification Chart HOW to Order Replacement PartsUse the chart below to identify small parts during assembly Exploded DRAWING-Model No. HRT15920 Model No. HRT15920 Limited Warranty
Top Page Image Contents