Healthrider HRTL19980 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 17

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. Caution: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.

1.Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back.

Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the lock knob to the left and hold it. Raise the treadmill until all parts of the treadmill are past the latch pin. Release the lock knob.

Make sure that the lock knob is fully released so the latch pin is securely holding the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85¡ Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the latch pin is securely holding the catch.

1.Hold the handrails and place one foot on the base.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot on the base, and carefully lower the tread- mill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the treadmill with your right hand as shown. Using your left hand, pull the lock knob to the left and hold it. Pivot the treadmill down until all parts of the treadmill are past the pin. Slowly release the lock knob.

2.See the drawing at the top of this page. Hold the tread- mill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.

Latch

Pin

Lock

Knob

Catch

Base

Wheels

Lock

Knob

17

Image 17
Contents Customer HOT Line QUESTIONS?Model No. HRTL19980 Serial No Table of Contents Important Precautions Page Right Side Before YOU BeginBack Assembly Performant Lubetm Walking Belt HOW to Plug in the Power CordGrounding Instructions See page 15 or call 1-800-727-9777 for more infor- mation Features of the ConsoleConsole Operation Refer to the drawing at the top Diagram of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode DISTANCE/INCLINE HOW to USE the Incline Programs and the Speed ProgramsWhenkey. you are finished exercising, remove To start the walking beltFollow your progress with the LED displays Desired speed and incline settings HOW to Program the Custom 1 and Custom 2 ProgramsPress the Start button or the Speed + button Seconds Follow your progress with the five displays HOW to USE the Custom 1 and Custom 2 Programs Whenkey. the program is completed, remove Optional Accessories Information ModeCD Module with CD COACHª Technology Earn Fitness Analysis ModuleHand Pulse Sensor TROUBLE-SHOOTING HOW to USE the Hand Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblemsolution TROUBLE-SHOOTING and MaintenanceStainless steel cover needs to be cleaned If the walking belt slips when walkedWorkout Guidelines Conditioning GuidelinesExercise Intensity Suggested Stretches Key Qty Description Part LISTÑModel No. HRTL19980HOW to Order Replacement Parts Exploded DRAWINGÑModel Limited Warranty