Healthrider HRTL19980 manual If the walking belt slips when walked

Page 19

PROBLEMSOLUTION

4.The walking belt is off-center or slips when walked on

a. If the walking belt has shifted to the
a. If the walking belt has shifted to the		a
left, first remove the key and UNPLUG		a
left, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment
bolt clockwise, and the right bolt counter-
clockwise, 1/4 of a turn each. Be careful


not to overtighten the walking belt. Plug in
the power cord, insert the key and run the

treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the
b. If the walking belt has shifted to the		b
right, first remove the key and UNPLUG		b
right, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn the left rear roller adjustment
bolt counterclockwise, and the right bolt
clockwise, 1/4 of a turn each. Be careful
clockwise, 1/4 of a turn each. Be careful
not to overtighten the walking belt. Plug in
the power cord, insert the key and run the

treadmill for a few minutes. Repeat until the walking belt is centered.

c. If the walking belt slips when walked
c. If the walking belt slips when walked		c
on, first remove the key and UNPLUG		c
on, first remove the key and UNPLUG
THE POWER CORD. Using the allen
wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the
walking belt is correctly tightened, you
walking belt is correctly tightened, you
should be able to lift the edges of the
walking belt 3 to 4 inches off the walking

platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

5.The stainless steel cover needs to be cleaned

a.The stainless steel walking platform can be cleaned with a stainless steel cleaner or mild soap and water and a soft cloth. Never use solvents or abrasive cleaners.

19

Image 19

Contents Model No. HRTL19980 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly Grounding Instructions HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Operation Features of the ConsoleSee page 15 or call 1-800-727-9777 for more infor- mation HOW to Turn on the Power Diagram of the ConsoleRefer to the drawing at the top HOW to USE the Manual Mode DISTANCE/INCLINE HOW to USE the Incline Programs and the Speed ProgramsFollow your progress with the LED displays To start the walking beltWhenkey. you are finished exercising, remove Seconds HOW to Program the Custom 1 and Custom 2 ProgramsDesired speed and incline settings Press the Start button or the Speed + buttonWhenkey. the program is completed, remove HOW to USE the Custom 1 and Custom 2 ProgramsFollow your progress with the five displays Earn Fitness Analysis Module Information ModeOptional Accessories CD Module with CD COACHª TechnologyHand Pulse Sensor TROUBLE-SHOOTING HOW to USE the Hand Pulse SensorHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblemsolution TROUBLE-SHOOTING and MaintenanceStainless steel cover needs to be cleaned If the walking belt slips when walkedExercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Key Qty Description Part LISTÑModel No. HRTL19980HOW to Order Replacement Parts Exploded DRAWINGÑModel Limited Warranty