Healthrider HRTL20001 manual HOW to Fold the Treadmill for Storage, HOW to Move the Treadmill

Page 11

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

 

Before folding the treadmill, unplug the power cord.

Caution:

You must be able to safely lift 45 pounds (20 kg) in order

 

to raise, lower, or move the treadmill.

 

1.Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise

the treadmill, make sure to lift with your legs rather

than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown at the right,

and hold the treadmill firmly. Using your left hand, lift the storage latch. Raise the treadmill until the locking pin

snaps into the storage latch. Make sure that the locking pin is inside the storage latch, and that the storage

latch is fully closed.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor-

age position as described above. Make sure that the lock- ing pin is inside the storage latch, and that the storage

latch is fully closed.

1.Hold one crossbar bracket with each hand. Place one foot on the base as shown.

2.Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location.

Never

move the treadmill without tipping it back, or the base

 

pads may come off. To reduce the risk of injury, use

 

extreme caution while moving the treadmill. Do not at-

 

tempt to move the treadmill over an uneven surface.

 

3.Place one foot on the base, and carefully lower the tread- mill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the treadmill with your right hand as shown. Using your left hand, lift the storage latch. Pivot the treadmill slightly until the locking pin is out of the stor- age latch.

Storage Latch

Locking Pin

Crossbar

Bracket

Base

Front Wheels

Storage Latch

Locking Pin

11

Image 11
Contents Customer HOT Line QUESTIONS?Table of Contents Important Precautions Front Before YOU BeginFor your benefit, read this manual carefully before BackLegs rather than your back AssemblyAssembly requires two people Wrench105 Snaps into the storage latch. Make sure that the locking97, and the Stabilizer Plate Operation and Adjustment STEP-BY-STEP Console Operation Adjust the speed in small incrementsSetting Follow your progress with the monitor displays Desired modePress the START/STOP button Steadily Information ModeNot press Too hard, or Circula Pulse will not be detectedHOW to Lower the Treadmill for USE HOW to Fold the Treadmill for StorageHOW to Move the Treadmill Tripped TROUBLE-SHOOTINGSymptom the Power does not Turn on Symptom the Power Turns OFF During USESymptom the Treadmill Sits Unevenly on the Floor Symptom the Walking Belt Slows When Walked onSymptom the Walking Belt is OFF-CENTER When Walked on Workout Guidelines Conditioning GuidelinesExercise Intensity AGESuggested Stretches Part No F02855-C R0896A Ordering Replacement PartsLimited Warranty Healthrider Acquisition Corp., Inc., 1500 S W., LOGAN, UTRemove this Exploded Drawing and Part List from the Manual Right Crossbar Bracket DescriptionController ChokeExploded DRAWING-Model No. HRTL20001