JVC UX-H35 manual Putting the Batteries into the Remote Control, When using the unit in your car

Page 12

When using the unit in your car

To car’s cigarette

lighter socket (12 V)

12V 4A
DC IN	Car adapter
	(JVC model: CA-R120E)

Connect a car adapter to the DC IN (12 V, 4 A) connector and the cigarette lighter socket.

•DO NOT connect the car adapter to the

cigarette lighter socket before connecting it to the DC IN connector. Otherwise, a short-circuit may occur if the adapter plug makes contact with any metal part inside the car.

•DO NOT use this unit for a long time in a car while the car ignition switch is turned “OFF” (or set to “ACC”). Otherwise, the car battery will be exhausted.

Putting the Batteries into the Remote Control

Insert the batteries—R6(SUM-3)/AA(15F)—into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment.

When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2	R6(SUM-3)/AA(15F)

3

•DO NOT use an old battery together with

a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, the remote control will be damaged from battery leakage.

9

Image 12

Contents Micro Component System Page Important for Laser Products Precautions IntroductionAbout This Manual Contents Location of the Buttons Main UnitTop view Front viewDisplay window Main unit Display windowRemote Control Pressing one of these buttons also turns on the unitSupplied Accessories Connecting AntennasGetting Started FM antennaConnecting Speakers Turn the AM loop antenna until you have the best receptionRelease your finger from the clamp To connect an outdoor AM antennaConnecting Other Equipment To connect the AC power cordTo remove the speaker grilles To connect an audio equipmentPutting the Batteries into the Remote Control When using the unit in your carSetting the Clock Common OperationsTurning On the Power Adjusting the VolumeAdjusting the Tone Bass/Treble Reinforcing the Bass SoundTuning in to a Station Presetting StationsListening to FM and AM Broadcasts Tuning in to a Preset Station Tune in to the station you want to presetPress SET Press SET againWhen playing a CD-R or CD-RW Playing Back DiscsPress 0 Open on the unit General notesBasic Disc Operations Programming the Playing Order of the Tracks-Program PlayTo check the program contents Playing at Random-Random PlayRepeating Tracks-Repeat Play Press RandomPlaying Back Tapes Playing Back a TapePress for cassette deck on the unit Put a cassette in with the exposed part of the tape downTo record on both sides-Reverse Mode RecordingRecording on a Tape To protect your recordingDisc Direct Recording One Track RecordingPress ONE Touch Repeat steps 2 and 3 to record other tracks you wantUsing the Timers Using Daily Timer and Recording TimerSet the on-time when you want the unit To turn on Set the off-time when you want the unit To turn off standbyAdjust the clock if you need Select the volume levelTo deactivate the timer temporarily With the source to playUsing Snooze Timer Using Sleep TimerHow the Sleep Timer actually works Press SleepMaintenance Cleaning the unitHandling cassette tapes Handling discsTroubleshooting Specifications0403MWMMDWJEM