Changing the Projected Image

 

22

 

 

 

q The following screen showing the status of image signals is displayed when only the image that the projector is currently displaying is available, or when no image signal can be found. You can select the input port where the equipment you want to use is connected. If no operation is performed after about 10 seconds, the screen closes.

LAN is displayed on the screen only when using EB-Z8050W.

Switch to the target image by Remote Control

You can change directly to the target image by pressing the following buttons on the Remote Control.

Remote Control

AChanges to images from the Computer input port.

BChanges to images from the Video input port.

CChanges to images from the S-Video input port.

DChanges to images of EasyMP Network Projection. (EB-Z8050W only) This button does not function when using EB-Z8000WU.

EEach time the button is pressed, the image displayed changes between the DVI-D and HDMI input ports.

FChanges to images from the BNC input port.

Page 22
Image 22
Epson EB-Z8000WU, EB-Z8050W manual Switch to the target image by Remote Control, Changing the Projected Image