Notes on operating the network menu
Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the configuration menu.
When done, make sure you go to the Setup complete, and select one of Yes, No, or Cancel. When you select Yes or No, you return to the
configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Exits to the Network menu without saving the settings.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics during setup. In this case, the following software keyboard is displayed. Use the
[h] button on the remote control or [w/], [v/], [</], and [>/] on the projector to move the cursor to the desired key, and then press the
[Enter] button to enter the alphanumeric. Enter figures by holding down the [Num] button on the remote control, and pressing the numeric buttons.
After inputting, press [Finish] on the keyboard to confirm your input. Press [Cancel] on the keyboard to cancel your input.
List of Functions
55