Epson EB-Z8050W, EB-Z8000WU manual Interface, Part Names and Functions

Part Names and Functions 11

Interface

The following ports can be accessed by removing the interface cover. For information on how to remove the interface cover and connect video equipment, s Quick Start Guide .

	Name		Function
A HDMI input port		Inputs video signals from HDMI compatible video
		equipment and computers. This projector is compatible
		with HDCPg signals. s Quick Start Guide
B BNC input port		For analog RGB signals from a computer and
		component video signals from other video sources.
		s Quick Start Guide
C Video input port		For composite video signals from video sources.
		s Quick Start Guide

DS-Video input port For S-video signals from video sources. s Quick Start Guide

Name	Function
E Cable holder	Connection may become defective when a thick heavy
	HDMI cable is connected to the HDMI input port. Run
	a commercially available cable tie through this holder to
	prevent the cable from disconnecting.

FComputer input port For analog RGB signals from a computer and component video signals from other video sources. s Quick Start Guide

		Connects to the power cable. s Quick Start Guide
G Power inlet
H Remote port		Connects the optional remote control cable set and
		inputs signals from the remote control. When the
		remote control cable is plugged into this port, the
		remote receiver on the projector is disabled.
I RS-232C port		When controlling the projector from a computer,
		connect it to the computer with an RS-232C cable. This
		port is for control use and should not normally be used.
		s p.111
J Wireless LAN Unit		Connects to the optional wireless LAN unit.
	port (EB-Z8050W only)
K Monitor Out port		Outputs to an external monitor the analog signal from
		the computer connected to the Computer input port or
		the BNC input port. This is not available for component
		video signals or other signals being input to any port
		other than the Computer input port or the BNC input
		port. s p.106
L LAN port		Connects to a LAN cable and then to a network.
	(EB-Z8000WU only)	s p.105
M DVI-D input port		Inputs digital RGB signals from a computer connected
		to the DVI-D output port. This projector is compatible
		with HDCPgsignals. s Quick Start Guide
N LAN Port		Connects to a LAN cable and then to a network.
	(EB-Z8050W only)	s p.105