Replacing Consumables

Caution

Wait until the lamps have cooled down sufficiently before removing the lamp cover. If the lamp is still hot, burns or other injuries may result. It takes about one hour after the power has been turned off for the lamp to be cool enough.

Attention

Never use the projector unless there are two lamps installed.

We recommend replacing both lamps together to maintain consistent hue and brightness of projected images.

Procedure

A After you turn off the projector's power and the confirmation buzzer beeps twice, disconnect the power cable.

B Wait until the lamps have cooled down sufficiently before removing the lamp cover on the back of the projector.

Pinch the tabs on the front of the lamp cover together to release the lock. When the lock releases, pull the cover straight out.

90

C Pull up the lock lever for the lamp you want to replace and pull the lamp straight out.

If the lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. s Epson Projector Contact List

ALamp 1

BLamp 2

D Install the new lamp.

Insert the new lamp along the guide rail in the correct direction so that it fits in place, push firmly until it is fully inserted, and pull down the lock lever until it clicks into place.

Page 90
Image 90
Epson EB-Z8000WU, EB-Z8050W manual Install the new lamp