Epson EB-Z8050W manual ESC/VP21 Commands, Command List, Cable Layouts, Serial Connection, 111

ESC/VP21 Commands 111

Command List

When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned.

When a command is input, the projector executes the command and returns a ":", and then accepts the next command.

If the command being processed terminates abnormally, an error message is output and a ":" is returned.

	Item		Command
Power ON/OFF	On		PWR ON
	Off		PWR OFF
Signal selection	Computer	Auto	SOURCE 1F
		RGB	SOURCE 11
		Component	SOURCE 14
	BNC	Auto	SOURCE BF
		RGB	SOURCE B1
		Component	SOURCE B4
	HDMI		SOURCE A0
	DVI-D		SOURCE 30
	Video		SOURCE 45
	S-Video		SOURCE 42

Cable Layouts

Serial Connection

•Connector shape: D-Sub 9-pin (male)

•Projector input port name: RS-232C

<At the projector> <At the computer>

<At the projector> (PC serial cable) <At the computer>

Shutter On/Off	On	MUTE ON
	Off	MUTE OFF

Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit.

Signal Name

GND

TD

RD

Function

Signal wire ground

Transmit data

Receive data