Problem Solving

 

79

 

 

 

Check

Is the computer set for dual display?

Only when projecting computer images

Is the correct resolution selected?

Only when projecting computer images

Image colors are not right

Remedy

If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting. s Computer video driver documentation

Set the computer so that the signals being output are compatible with the projector. s "Supported Monitor Displays" p.114 s Computer documentation

Check

Do the input signal settings match the signals from the connected device?

Is the image Brightness set correctly?

Are the cables connected correctly?

Is Contrastgadjusted correctly?

Is the Color Adjustment correctly?

Are the Color Saturation and Tint adjusted correctly?

Only when projecting images from a video source

Images appear dark

Remedy

Change the following settings according to the signal for the connected equipment.

When image is from a device connected to the Computer or BNC input port s Signal menu - Input Signal p.46 When image is from a device connected to the Video or S-Video input port s Signal menu - Video Signal p.46

Adjust the Brightness setting from the configuration menu. s Image Menu - Brightness p.44

Check that all the cables required for projection are securely connected. s Quick Start Guide

Adjust the Contrast setting from the configuration menu. s Image Menu - Contrast p.44

Adjust the Color Adjustment setting from the configuration menu. s Image Menu - Color Adjustment p.44

Adjust the Color Saturation and Tint settings from the configuration menu. s Image Menu - Color Saturation, Tint p.44

Check

Is the image Brightness set correctly?

Is Contrastgadjusted correctly?

Is the lamp due for replacement?

Remedy

Adjust the Brightness and Power Consumption settings from the configuration menu. s Image Menu - Brightness p.44 s Settings Menu - Power Consumption p.48

Adjust the Contrast setting from the configuration menu.

s Image Menu - Contrast p.44

When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer.When this happens, replace the lamp with a new lamp. s p.89

Page 79
Image 79
Epson EB-Z8050W, EB-Z8000WU manual Image Menu Contrast p.44