Saving a User's Logo |
| 97 |
|
|
|
You can save the image that is currently being projected as a User's Logo.
q When a User's Logo is saved, the previous User's Logo is erased.
Procedure
A Project the image you want to use as the User's Logo, and then press the [Menu] button.
Using the Remote Control | Using the Control panel |
B Select Extended - "User's Logo" from the configuration menu. s "Using the Configuration Menu"
Check the buttons you can use and the operations they perform in the guide under the menu.
| q | • If User's Logo Protect from Password Protect is set to On, a | |
| message is displayed and the user's logo cannot be changed. You | ||
|
| can make changes after setting User's Logo Protect to Off. | |
|
| s p.37 | |
|
| • If User's Logo is selected when Keystone, | |
|
| Progressive are being performed, the function currently being | |
|
| performed is cancelled. | |
|
|
|
|
C When "Choose this image as the User's Logo?" is displayed, select "Yes".
q When you press the [Enter] button on the Remote Control or the Control panel, the screen size may change according to the signal as it changes to the resolution of the image signal.
