Installation Methods |
| 84 |
|
|
|
The projector can be mounted on a ceiling or placed on a desk as shown below. Also, this projector can project images to various places because it can project images vertically or horizontally at each 90˚ angle.
Warning
•A special method is required when installing the projector to project images downward (ceiling mount) or upward. If installation work is not carried out correctly, the projector could fall down. This may result in injury or accidents.
Contact your dealer or the nearest address provided in the Support and Service Guide if you want to use this installation method. s Epson Projector Contact List
•If you use adhesives on the Ceiling mount fixing points to prevent the screws from loosening, or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall from its ceiling mount. This could cause serious injury to anyone under the ceiling mount and could damage the projector.
When installing or adjusting the Ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants and so on.
•When mounting the projector on the ceiling, be sure to arrange measures to prevent it from falling such as passing a wire through the handles.
Attention
•Suspend the projector from the ceiling and project images from in front of a screen.
•Project images from in front of a screen.
• Project images directly up
•Suspend the projector from the ceiling and project images from behind a translucent screen.
•Project images from behind a translucent screen.
• Project images directly down
•Do not install the projector at any angles other than those shown in the following illustrations.
•Do not use the projector upside down.
•Set the Direction properly in the configuration menu according to the angle of installation. s p.49
•Using the projector at an improper angle or if the configuration menu settings are wrong causes malfunctions and shortens the operating life of optical parts.
| q | • An optional Ceiling mount is required when suspending the | |
| projector from a ceiling. | ||
|
| s p.94 | |
|
| • The Projection can be changed from the configuration menu. | |
|
| s p.49 | |
|
|
|
|
