Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only)

 

99

 

 

 

There are two methods for setting WPS.

Push Button Method

SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment. This method is recommended when the projector and access point are close together.

PIN Code Method

SSID and security are set automatically by inputting an 8-digit code that was assigned to the projector from the computer to the access point in advance. Make connection settings between the computer and the access point in advance. For details on how to make this connection, refer to the manual provided with the access point. This method is recommended when the projector is mounted on the ceiling.

B From "Wireless LAN" select "To Setup Wizard".

The following screen is displayed.

Connection Setup Method

Procedure

A During projection, press the [Menu] button and select

Network - "Network Configuration" from the configuration menu.

When connecting using the Push Button Method, follow the steps given below.

Go to "Making a connection using the PIN Code Method" when connecting using the "PIN Code Method". s p.101

Making a Connection Using the Push Button Method

Procedure

The Network Configuration screen is displayed.

A Select "Push Button Method".

Page 99
Image 99
Epson EB-Z8050W, EB-Z8000WU manual Connection Setup Method, Making a Connection Using the Push Button Method Procedure