
Limitation of the Number of the Target Projectors when Using Multiple Projectors |
| 32 |
|
|
|
When an ID is set for the projector and the remote control, you can use the remote control to operate only the projector with a matching ID. This is very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The default value is Off.
You can set an ID for the remote control within a range of "0" to "9". The default value is "0". When the ID switch on the side of the remote control is set to Off, you can operate all projectors by the remote control regardless of the ID setting for the projector or the remote control.
The following table shows the possible combinations of projector ID and remote control ID.
Opera- | Combinations | Descriptions | |
tion | |||
|
| ||
Possible | Projector ID: 1 | When the control switch is | |
|
| set to On, and Projector ID | |
|
| matches the remote control | |
| ID switch: On | ID, you can operate the | |
| projector with the remote | ||
| Remote control ID: 1 | ||
| control. | ||
Possible | Projector ID: 1 | When the ID switch on the | |
|
| side of the remote control is | |
|
| set to Off, you can operate | |
| ID switch: Off | the projector with the | |
| remote control regardless of | ||
| Remote control ID: 3 | ||
| the projector's ID setting. | ||
Possible | Projector ID: Off | When the Projector ID is | |
|
| Off, you can operate with | |
|
| the remote control | |
| ID switch: On | regardless of the remote | |
| control ID setting. | ||
| Remote control ID: 1 | ||
|
|
Opera- | Combinations | Descriptions | |
tion | |||
|
| ||
Possible | Projector ID: 1 | When the remote control ID | |
|
| is "0", you can operate with | |
|
| the remote control | |
| ID switch: On | regardless of the Projector | |
| ID setting. | ||
| Remote control ID: 0 | ||
|
| ||
Not possi- | Projector ID: 1 | When the remote control | |
ble |
| switch is On, and Projector | |
|
| ID and remote control ID do | |
| ID switch: On | not match, you cannot | |
| operate with the remote | ||
| Remote control ID: 3 | ||
| control. |
When Remote Control Type is set to Simple from Operation in the configuration menu, you cannot set the remote control ID.