List of Functions |
| 58 |
|
|
|
Sub Menu
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
SSID Display
IP Address Display
Function
You can set whether or not (On/Off) to use DHCPg.
If this is set to On you cannot set any more addresses.
You can input the IP addressgassigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can input the Subnet Maskg for the projector. You can input a number from 0 to 255 in each field of the address. However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
You can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addressesgcannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Displays the MAC address.
To prevent the SSID from being displayed on the LAN Standby screen, set this to Off.
To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.