Avaya CMC1 manual Label the Main Distribution Frame, Label Graphic Symbols and Nomenclature

Install Equipment Room Hardware

Table 6: Sneak Fuse Connector Pinout (continued)

Connector	Pair/Fuse
Pin Numbers	Number
49/34	24
50/25	25
	2 of 2

Label the Main Distribution Frame

Figure 23 shows the graphic symbols used on the supplied labels for the system, cross-connections, information outlets, and cables.

To label the MDF:

1.Write the floor and building identification on each label as required.

2.Insert the labels into the plastic holders.

3.Snap the holders into the appropriate locations on the MDF.

Figure 23: Label Graphic Symbols and Nomenclature

			r758422i LJK 050996
Figure notes:
1.	Floor and building identification	4.	Slot	7.	Tie circuit
2.	Cabinet	5.	Information outlet	8.	Floor
3.	Carrier	6.	Site/satellite closet	9.	Building

4.Label the cables as required using the supplied labels. Label code number 220A (Comcode 103970000) contains all required labels.

Issue 10 June 2005 67