Avaya CMC1 manual Add Integrated Announcements/TN2501AP, Replacing a TN750/B/C circuit pack

Adding or Removing Hardware

Settings for Modem Connected to the Data

Terminal Equipment (DTE)

To administer a modem connected to data terminal equipment:

1.Type add station next and press Enter.

2.Type 2500 in the Type field.

3.Type the port assignment in the Port field and press Enter.

Add Integrated Announcements/TN2501AP

Replacing a TN750/B/C circuit pack

If you are replacing a TN750C announcement circuit pack with the new TN2501AP:

●get a list and description of the announcements stored on the TN750C circuit pack.

●re-record the announcements on a computer or at a professional recording studio as .wav files (CCITT µ-Law or A-Law, 8KHz, 8-bit mono), so that they are ready to transfer to the new announcement circuit pack after it is installed and administered. See Announcement File Specifications.

! CAUTION:

Before you remove a TN750A or B circuit pack from its carrier, ensure that you have backed up the announcements that are stored on it. Once you remove the circuit pack from the carrier, power is lost along with the announcements.

Replacing old announcement circuit packs with the new TN2501AP circuit pack requires that you

-remove previous announcement administration

-record new announcements for the TN2501AP

-re-record any announcements currently resident on the TN750 circuit packs that you are replacing. You cannot transfer or restore TN750 announcements from flash card, tape, or optical disk to the TN2501AP.

258 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways