Avaya CMC1 manual Save announcements if necessary, Upgrade the software

Task table

Save announcements (if necessary)

Note:

The TN750C and the TN2501AP Integrated Announcement circuit packs store announcements in nonvolatile memory; saving the announcements to a flashcard is optional.

To save announcements:

1.If the PPN contains a TN750/B Announcement circuit pack, type display announcements and press RETURN.

2.If administered recorded announcements are listed, type save announcements UUCSS and press RETURN. For example, 01D03.

The time necessary for this depends upon the length and number of the announcements on the circuit pack.

Note:

For some DEFINITY ECS software versions, type save announcements from UUCSS. Type help and press RETURN for the complete command syntax.

Upgrade the software

To upgrade the software:

1.Write down the release string EXACTLY as it appears on the orange card.

Note:

Note: The entire string is 16 characters, including 4 periods.

2.Insert the media in the processor circuit pack.

3.Type upgrade software <release string> (case sensitive) and press Enter. This process takes about 10-12 minutes.

4.When the system prompts (beeps), insert the original translation (white) card into the processor circuit pack.

Note:

You have 2 minutes to replace the Avaya Communication Manager card with the translation card. If you miss this window, the system comes up without translations. Correct this by inserting the original translation card into the processor circuit pack and use the reset system 3 command at the SAT.

5. When the upgrade is complete, log off the system and log in again as craft.

Issue 10 June 2005 221