Avaya CMC1 S. Robotics Modem Dip Switch Settings Description, Display result codes, Smart mode

Set Up System Access

Table 8: U.S. Robotics Modem Dip Switch Settings (continued)

Dip	Setting	Description
Switch
3	UP	Suppress result codes
	DOWN	Display result codes
4	UP	Echo offline commands
	DOWN	No echo, offline commands
5	UP	Auto answer on first ring or higher if specified in NVRAM
	DOWN	Auto answer off
6	UP	Carrier detect normal
	DOWN	Carrier detect override
7	UP	Load NVRAM defaults
	DOWN	Load factory defaults
8	UP	Dumb mode
	DOWN	Smart mode

2 of 2

5.Plug the modem into an AC power outlet.

6.Turn on the modem.

7.Set the following port settings:

Baud rate	9600
Data bits	8
Parity	None
Stop bits	1
Flow control	hardware

Issue 10 June 2005 75