Avaya CMC1 manual Type add change ds1 Uucss and press Enter, DS1 Circuit Pack, Cas

Install TN464HP/TN2464CP with Echo Cancellation

4.Type [add change] ds1 UUCSS and press Enter.

add ds1 2b08		Page	1	of 1 SPE B
		DS1 CIRCUIT PACK
Location:	02B08	Name: Echo Cancel t23
Bit Rate:	2.048	Line Coding: hdb3
Signaling Mode:	CAS
Interconnect:	pbx	Country Protocol: 1
Interface Companding:	mulaw		CRC? n
Idle Code:	11111111
Slip Detection? y		Near-end CSU Type: other
Echo Cancellation? y
EC Direction: inward
EC Configuration:	1

5.On the DS1 Circuit Pack screen, set the Echo Cancellation? field to y.

When set to y, 2 new fields display: EC Direction: and EC Configuration:.

●If you know the echo is coming into the Avaya CMC1 Media Gateway, keep the default setting for the EC Direction: field of inward.

●If you know that the distant party is hearing echo that originates in the Avaya CMC1 Media Gateway or its line side stations or equipment, set the EC Direction: field to outward.

●Keep the default setting for the EC Configuration: field of 4. This setting minimizes extremely strong echo, very hot signals, or excessive clipping or breakup of speech from a distant party. It reduces speech clipping but may allow slight residual echo or more background noise.

6.Test the voice quality on a telephone connected through the TN464HP or TN2464CP circuit packs and known to have echo to see if the echo was eliminated.

Issue 10 June 2005 251