Avaya CMC1 manual Ixc, BCC Value TSC CA-TSC

CAMA/E911 Installation

23.In the Call Type field, enter emer and press Enter.

24.At the prompt, type change route-pattern<number> (the route pattern to be changed; in the example below, the route pattern is 11) and press Enter.

Figure 52: Route Pattern form (Page 1)

									Page 1	of X
							Pattern Number: 11
Grp.		FRL NPA Pfx Hop				Toll No. Del Inserted				IXC
No.				Mrk Lmt		List Digits		Digits
1: 1__		0	___	_	__	__	__	____________________________________		user
2: ___		_	___	_	__	__	__	____________________________________		user
3: ___		_	___	_	__	__	__	____________________________________		user
4: ___		_	___	_	__	__	__	____________________________________		user
5: ___		_	___	_	__	__	__	____________________________________		user
6: ___		_	___	_	__	__	__	____________________________________		user
	BCC VALUE			TSC CA-TSC			ITC BCIE Service/Feature		Numbering LAR
0	1	2 3 4 W			Request				Format
1: y	y y y y n			y none_____ both ept				outwats-bnd____ BAND: ___ ________		none
2: y	y y y y n			n			rest	_______________	________	next
3: y	y y y y n			n			rest	_______________	________	rehu
4: y	y y y y n			n			rest	_______________	________	none
5: y	y y y y n			n			rest	_______________	________	none
6: y	y y y y n			n			rest	_______________	________	none

25.On the Route Pattern screen, in Grp. No. field, enter the CAMA trunk group number.

26.In the FRL field, enter 0.

Note:

For the following step, if the Central Office (CO) wants KP11ST as the dialed digit string, then leave blank. If the CO wants KP911ST, then insert a “9” in the Inserted Digits field.

27.Administer the Inserted Digits field if needed and press Enter.

28.At the prompt, type change route-pattern<number> (the route pattern to be changed; in the example below, the route pattern is 12) and press Enter.

Issue 10 June 2005 123