Avaya CMC1 manual Installing the TN2302AP IP Media Processor, Connect the cables for TN799DP

Add IP Solutions

Figure 91: TN2302AP Amphenol Adapter

3

2

1

addfipm2 KLC 083000

Figure notes:
1. Amphenol connector to backplane	2.	To Ethernet
connector corresponding to TN2302AP	3.	9-pin connector for maintenance
slot

Installing the TN2302AP IP Media Processor

To install a TN2302AP IP Media Processor, you must install

●One or more TN2302AP circuit pack(s).

●One or more TN799DP circuit pack(s) (a TN799DP can support more than one TN2302AP).

●An IP Media Processor adapter.

Connect the cables for TN799DP

To connect the cables for TN799DP:

1.Determine into which port slots you are putting the TN799DP C-LAN circuit packs. From the rear of the cabinet:

2.Connect a 259A connector to the backplane connector corresponding to each TN799DP slot.

3.Connect one end of each DW8 cable to each 259A connector.

Issue 10 June 2005 281