Avaya CMC1 manual Announcement File Specifications, Caveats, Before you start, Configurations

Add Integrated Announcements/TN2501AP

Announcement File Specifications

The TN2501AP circuit pack, Voice Announcement over LAN (VAL), requires that announcement files are in the following .wav formats:

●CCITT A-Law or CCITT µ-Law companding format (do not use PCM)

●8KHz sample rate

●8-bit resolution (bits per sample)

●Mono (channels = 1)

All previously-recorded announcements must be converted to these file formats to work on the TN2501AP circuit pack. Announcements recorded through the direct telephone access are automatically recorded in the correct file formats.

Caveats

Remember the following points when using the TN2501AP integrated announcement circuit pack for the first time or when replacing the TN750C circuit pack:

●Despite the feature name, announcements are not played over the LAN but can be transferred to and from the TN2501AP circuit pack over the LAN.

●You cannot save or restore announcements to a TN2501AP circuit pack to/from

-a TN750C circuit pack.

-flash cards.

-tape.

-magneto optical disks.

Before you start

Ensure that you have the required hardware (see Hardware specifications).

Configurations

Figure 84 shows the configuration options for the TN2501AP (VAL) circuit pack within a system.

Issue 10 June 2005 259