Avaya CMC1 manual Speed Monitor DSR Yes Monitor DCD No, Remote Port

Install terminal server

5.Fill in the following fields. Leave the default settings for the other fields.

●Speed: 9600

●Monitor DSR: Yes

●Monitor DCD: No

●Name: port number or other descriptive name

●Terminal type: undef

●CLI/Menu: CLI

●Reset Term: No

●Flow ctrl: xon/xoff

●IP addresses: leave blank

●Mask: leave blank

●Access: Remote

●Authentication: None

●Mode: Raw

●Connection: None

●Host: leave blank or enter IP Address

●Remote Port: 0

●Local Port: must match the value of Remote Port on the IP Services screen of the Communication Manager software

6.Press ENTER and select Save & Exit to effect the changes.

7.Press ENTER again to view the Administration Menu.

8.Select kill to disable the port connection.

9.Repeat the steps for each additional port you want to administer.

10.When administration is complete, from the Connections Menu, select logout (or press Ctrl D).

11.Close HyperTerminal.

At this point, you have established a connection path from the adjunct through the IOLAN+ to the C-LAN circuit pack.

Issue 10 June 2005 307