Avaya CMC1 manual Add ISDN-PRI, Test the IP connections, North American, International

Add ISDN—PRI

Test the IP connections

Use the ping and status link commands to test the new IP connections that you have administered.

Add ISDN—PRI

North American

To add ISDN-PRI trunks in North America:

1.Install a TN767E (or later) DS1 or a TN464HP DS1/E1 circuit pack for a signaling link and up to 23 ISDN — PRI Trunk Group members.

2.Install a Tone-Clock circuit pack to provide synchronization for the DS1 circuit pack.

If using a TN464HP, then packet bus support has not been added, requiring more than 8 PRI signaling groups. See Add Packet Bus Support on page 269 for adding circuit packs for packet bus support.

International

To add ISDN-PRI trunks outside of North America:

1.Install a TN464HP DS1/E1 circuit pack for the assignment of the 2 signaling channels and up to 30 ISDN — PRI Trunk Group members. Each E1 span provides 32 ports.

2.Install a Tone-Clock circuit pack to provide synchronization for the DS1/E1 circuit pack.

If using a TN464F, then packet bus support has not been added, requiring more than 8 PRI signaling groups. See Add Packet Bus Support on page 269 for adding circuit packs for packet bus support.

Add Packet Bus Support

If packet bus support is not already installed, see Add Packet Bus Support on page 269 and perform the steps.

Issue 10 June 2005 267