Avaya CMC1 manual Install terminal server, Installing and administering the terminal server

Install terminal server

Install terminal server

This chapter provides information on connecting adjunct equipment using a terminal server (Figure 94). Avaya supports the IOLAN+ 104 terminal server.

Any device that does not support a direct TCP/IP connection, but that does support an RS232 interface, can connect through a terminal server. System printers and some CDR devices use RS232 connections and can connect through a terminal server.

You can connect up to four adjuncts through one terminal server.

Figure 94: Switch-to-adjunct LAN connectivity through a terminal server

1

3

LAN

2

cydfadj KLC 091302

Figure notes:

1.switch

2.C-LAN circuit pack

3.10/100Base-T Hub (optional)

6

			4
DATA CONNECTIONS ONLY - NOT FOR TELECOM USE					5
1	2	3	4	10BASE-T	5VDC

4.terminal server

5.serial port

6.CDR adjunct

Installing and administering the terminal server

Make sure you have all the equipment on site before the installation. You must have the hardware listed in Table 61.

Table 61: Required equipment

Comcode	Description	Qty	Supplier
700015084	IOLAN+ 104 communications server	1	Avaya
NA	RJ45-to-DB25 connector for IOLAN+	4	Avaya
	(supplied with 700015084)

1 of 2

Issue 10 June 2005 297