Avaya CMC1 manual Connect printers, Connecting printers using TCP/IP, Task list

Connect printers

Note:

When you move ESM circuit packs, you MUST remove the DS1 and signaling group translations. You cannot use the change circuit pack command.

Refer to Expansion services module on page 320 for further information.

Connect printers

This section provides information on connecting and configuring printers that work with your system and Avaya™ Communication Manager.

Connecting printers using TCP/IP

Printers can be connected to the switch using asynchronous TCP/IP links and a terminal server. This section provides information on connecting adjuncts to the C-LAN and providing the initial administration.

Task list

Whether you use an end-to-end TCP/IP configuration, a terminal server or a PC running RSP, you must complete the following tasks:

●Administering IP node names on page 309.

●Administering IP services on page 309.

●Administering adjunct parameters on page 323.

●If you are using a terminal server, also complete Installing and administering the terminal server on page 297.

●If you are using a PC with the Downloadable RSP Tool, complete Using the downloadable reliable session-layer protocol (RSP) tool on page 324.

Administering adjunct parameters

You must administer adjunct parameters to let the system know that the adjunct is connected through TCP/IP.

PMS journal and PMS log printers

See Guestworks® and DEFINITY® Systems Technician Handbook for Hospitality Installations , 555-231-743.

Issue 10 June 2005 323