Avaya CMC1 manual ARS Digit Analysis Table, Ani

Installing and Cabling the Cabinets

Figure 51: ARS Digit Analysis Table

ARS DIGIT ANALYSIS TABLE
		Partitioned Group Number: _			Percent Full:		___
Dialed	Total	Rte Call Nd	ANI	Dialed	Total	Rte Call Nd ANI
String	Mn Mx	Pat Type Num	Rq	String	Mn Mx	Pat Type Num Rq
9________________ 7_ 7_		2__ hnpa ___ n __________________ __ __ ___ ____ ___ _
976______________ 7_ 7_		den hnpa ___ n __________________ __ __ ___ ____ ___ _
11_______________ 2_ 2_		11_ emer ___ n __________________ __ __ ___ ____ ___ _
911______________ 3_ 3_		12_ emer ___ n __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __		___ ____ ___ _ __________________ __ __ ___ ____ ___ _

14.On ARS Digit Analysis Table screen appears. In the Dialed String field, in the first empty row, enter 11.

15.In the Total Mn field, enter 2.

16.In the Total Mx field, enter 2.

17.In the Rte Pat field, enter the desired Route Pattern (in the example above the route pattern is 11).

Note:

For the following step, if you are using the Attendant Crisis Alerting feature, type alrt instead of “emer.”

18.In Call Type field, enter emer.

19.On the next empty row, in the Dialed String field, type 911.

20.In the Total Mn field, enter 3.

21.In the Total Mx field, enter 3.

22.In the Rte Pat field, type the desired Route Pattern (in the example above the route pattern is 12).

Note:

For the following step, if you are using the Attendant Crisis Alerting feature, type alrt instead of “emer.”

122 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways