Avaya CMC1 manual Add DS1 Tie and OPS, Tie Trunk Option-Switch Settings and Administration

Add DS1 Tie and OPS

Table 55: Tie Trunk Option-Switch Settings and Administration

Installation Situation		Preferred Signaling		E&M/SMPLX	Prot/Unprot	Administered
		Format		Switch	Switch	Port
Circumstance	To	System	Far-End
Collocated	Avaya	E&M Type	E&M Type	E&M	Unprotected	Type 1
	CMC1	1	1
	Media
	Gateway
		Compatible	Standard			Compatible
Inter-Building	Avaya	Protected	Protected	E&M	Protected	Type 1
	CMC1	Type 1	Type 1
	Media
	Gateway
		Compatible	Standard			Compatible
			Plus
			Protection
			Unit
Collocated	Net	E&M Type	Any PBX	E&M	Unprotected	Type 1
	Integrated	1
		Standard

Add DS1 Tie and OPS

The TN2313AP DS1 Tie Trunk and TN767B (or later) DS1 Interface circuit packs provide connections to a 1.544 Mbps DS1 facility (T1) as 24 independent

64 Kbps trunks.

The TN2313AP DS1 Tie Trunk, TN767B (or later) DS1 Interface, and TN464HP DS1 Interface circuit packs provide connections to a 2.048 Mbps DS1 facility (E1) as 32 independent 64-kbps trunks.

Service Interruption

To add DS1 tie and OPS trunks:

1.Since the addition of DS1 tie-trunk service may require a service interruption, notify the customer in advance as to when the addition will occur.

2.For information about administering DS1 Tie Trunks, refer to Administrator’s Guide for Avaya Communication Manager.

Issue 10 June 2005 255