Avaya CMC1 manual Add did Trunks, Add Tie Trunks

Add DID Trunks

Add DID Trunks

Requirements

Two circuit packs presently support Direct Inward Dial (DID) trunks: the TN753 DID trunk circuit pack and the TN797 Combination Circuit pack. Each can support up to 8 DID trunks.

Installation

To add DID trunks:

1. Determine the port assignment of the trunk from the Trunk Group form.

EXAMPLE:	3	A	07	01
	Cabinet (Port	Carrier	Slot	Port
	Network)		Number	Number

2.Install a DID Trunk circuit pack in assigned carrier slot (if an additional circuit pack is required).

3.Administer forms listed under “DID Trunk Group” in Administrator’s Guide for Avaya Communication Manager.

Add Tie Trunks

Requirements

Each tie trunk connects to 1 port of a 4-port tie trunk circuit pack or to an assortment of international tie trunk circuit packs.

Issue 10 June 2005 253