Avaya CMC1 manual Automatically remove the new Download, the procedure

Upgrade Firmware on Programmable Circuit Packs

Table 54: Firmware Download fields and descriptions (continued)

Field	Description	Notes
Remove Image	Type y if you want the procedure to	At the completion of a successful
File After	automatically remove the new	download, the procedure
Successful	firmware image file [default].	automatically removes the new
Download		firmware image file from the
		source file system, freeing up the
		memory on the source circuit
		pack. We recommend using the
	Type n if you do not want the new	default setting.
	firmware image file removed.	If field is set to n, you must
		manually remove the new
		firmware image file from the
		source file system after the
		download has completed. (See
		Disable file system on page 245
		for instructions.)
Start Date/	Type the date and time that you want
Time	the firmware download to begin.
Stop Date/	Type the date and time that you want	If the scheduled stop time is
Time	the firmware download to end.	reached before the new firmware
		image file has been downloaded
		to every circuit pack, the system
		finishes downloading to the circuit
		pack in progress before aborting
		the remainder of the download
		schedule.
Target	Type the UUCSS address of the	For a self download, this circuit
Location	circuit pack that you are updating.	pack must reside in the same
		location as the source pack.
		For a C-LAN-distributed
		download, enter up to 50
		locations — these must all be the
		same type of circuit pack.
		2 of 2

Issue 10 June 2005 241