Avaya CMC1 manual Administering IP node names, Administering IP services

Install terminal server

Administering IP node names

You must administer the IP addresses of the C-LAN board, any adjunct that connects directly to the LAN, the terminal server (if appropriate), and the PC running the Reliable Session-Layer Protocol (if appropriate). You use the Node Names screen to do this.

1.Type change node-names ip and press RETURN.

2.Enter the name and the IP address of the C-LAN board, as well as any adjunct, terminal server or PC you need to administer.

change node-names ip							Page 1 of 1
		NODE NAMES
Name	IP Address		Name			IP Address
1.	switch-clan___	123.456.7		.89	17.	______________	___.___.___.___
2.	callacctg_____	123.456.9		.00	18.	______________	___.___.___.___
3.	termserver____	123.456.11 .00			19.	______________	___.___.___.___
4.	pmslogpc______	123.456.78 .00			20.	______________	___.___.___.___
5.	______________	___.___.___.___			21.	______________	___.___.___.___
6.	______________	___.___.___.___			22.	______________	___.___.___.___
7.	______________	___.___.___.___			23.	______________	___.___.___.___
8.	______________	___.___.___.___			24.	______________	___.___.___.___
9.	______________	___.___.___.___			25.	______________	___.___.___.___
10.	______________	___.___.___.___			26.	______________	___.___.___.___
11.	______________	___.___.___.___			27.	______________	___.___.___.___
12.	______________	___.___.___.___			28.	______________	___.___.___.___
13.	______________	___.___.___.___			29.	______________	___.___.___.___
14.	______________	___.___.___.___			30.	______________	___.___.___.___
15.	______________	___.___.___.___			31.	______________	___.___.___.___
16.	______________	___.___.___.___			32.	______________	___.___.___.___

3.Print a copy of this screen, or write down the node names you entered. You need this information for the next administration task.

4.Press ENTER to save your changes.

Administering IP services

For each adjunct that you connect using TCP/IP, you need to administer IP services to establish the IP address/TCP port pairing. The IP address is associated with the node name that you just administered. In this example, we are administering the primary CDR connection as end-to-end TCP/IP.

1. Type change ip-servicesand press RETURN to assign the CDR endpoint.

Issue 10 June 2005 309