Avaya CMC1 manual Initial Administration Steps for C-LAN IP Media Processor, Node Names

Adding or Removing Hardware

Initial Administration Steps for C-LAN and

IP Media Processor

Note:

Refer to the Administration for Network Connectivity for Avaya Communication Manager for specific information.

To administer the C-LAN and IP Media Processor circuit packs:

1.Log in as craft.

2.Type change node-names and press Enter.

3.On page 2, type in the node names and IP addresses for the TN799B/C and the TN2302AP.

Note:

The customer or design team provides the actual name and address. Suggest a generic name and not one tied to the circuit pack.

change node-names					Page 2 of 6
		NODE NAMES
Name	IP Address	Name		IP Address
clan-a1	192.168.1 .31		.	.	.
clan-b1	192.168.2 .31		.	.	.
default	0 .0 .0 .0		.	.	.
mrmedpro1	192.168.1 .81		.	.	.

. . .	. . .
. . .	. . .
. . .	. . .
. . .	. . .
. . .	. . .
. . .	. . .
. . .	. . .
. . .	. . .
. . .	. . .

4.Type display circuit-packand press Enter. Verify that the TN2302AP shows up in the Code column.

284 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways