Avaya CMC1 manual Tie Trunk Circuit Packs Component Side

Adding or Removing Hardware

Installation

To add tie trunks:

1. Determine the port assignment of the trunk from the trunk group screen.

EXAMPLE:	3	A	07	01
	Cabinet (Port	Carrier	Slot	Port
	Network)		Number	Number

2.Install the tie trunk or an international tie trunk circuit pack in assigned carrier slot (if an additional circuit pack is required).

3.For customer-owned (not leased) tie-trunk facilities (such as campus environments), tie trunk circuit packs provide signaling capabilities beyond those specified by the industry-wide E&M standard. Use Figure 83: Tie Trunk Circuit Packs (Component Side) on page 254 and Table 55: Tie Trunk Option-Switch Settings and Administration on page 255 to choose the preferred signaling format, set switches on the circuit pack, and administer the port.

4.Administer forms listed under “Tie Trunk Group” in theAdministrator’s Guide for Avaya Communication Manager.

Figure 83: Tie Trunk Circuit Packs (Component Side)

UNPROT

4 3 2 1 PROT

SMPLX

PORT 4

SMPLX

PORT 3

SMPLX

PORT 2

SMPLX

PORT 1

E & M E & M E & M E & M

r758183 RBP 050896

254 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways