Avaya CMC1 Verify the Upgrade, Enable Scheduled Maintenance, Type display alarms and press Enter

Upgrading R6csi/R7csi/R8csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI

Verify the Upgrade

To verify the upgrade:

1.Type status system 1 and verify that the system is in a normal state.

2.Type display alarms and press Enter.

If the system is not alarm-free, take the needed corrective actions.

3.Type list configuration software-versionand press Enter. Verify the Avaya Communication Manager configuration.

4.Type display communication links and press Enter. Status each of the links.

Note:

ISDN-PRI D-channel links no longer appear on this screen. (For Release 7 and later, ISDN-PRI resides on the network packet circuit pack.) For Release 7 and later, the only way to determine if an ISDN-PRI D-Channel is up is to type status signaling group and press Enter.

5.Type list signal press Enter. For each signal, type status signal and press Enter.

Note:

Check the ISDN-PRI D-channel links here.

6.Execute the following commands and verify that the information is correct: list station

list trunk-group list hunt-group list data-module

Enable Scheduled Maintenance

To enable scheduled maintenance:

1.Type change system-parameters maintenance and press Enter.

2.Check the Start Time and Stop Time fields.

196 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways