Avaya CMC1 Settings for Modem Connected to Data Module, Type add data-module next and press Enter

Add Pooled Modem

! CAUTION:

The L5 and L7 power supplies look identical. Check the label to be sure you have the L7 before installing.

To add a pooled modem:

1.Determine the port assignment of the circuit packs to be added (if required).

2.Install the appropriate circuit packs in assigned carrier slot (if required).

3.For Paradyne 3800 series modems:

a.Type AT&F&D2&S4\D3S2=128x7V2S7=60S85=1 and press Enter.

b.Type ATY0S10=100S78=2M0E0\N1&W and press Enter.

4.For other types of modems, refer to the vendor’s documentation.

Settings for Modem Connected to Data Module

To administer a modem connected to a data module:

1.Type add data-module next and press Enter.

2.Type pdm in the Type field.

3.Type x in the Port field.

4.Type dte in the Connected to field and press Enter.

5.Type add station next and press Enter.

6.Type 2500 in the Type field.

7.Type x in the Port field.

8.Type n in the Tests field and press Enter.

9.Type add modem-pool next and press Enter.

10.Type combined in the Group Type field.

11.Type 5 in the Hold Time (min) field.

12.Type two-wayin the Direction field.

13.Type 9600 in the Speed field.

14.Type Full in the Duplex field.

15.Type async in the Synchronization field.

16.Type the port pair assignments in the Analog and Digital fields and press Enter.

Issue 10 June 2005 257