Avaya CMC1 manual Espa radio paging, External ringing

Adding or Removing Hardware

ESPA radio paging

Figure 118 shows typical connections to European Standard Paging Access (ESPA) equipment. Connect the LINE jack on the PassageWay interface to a digital line 4-wire DCP circuit pack through the MDF.

Figure 118: Typical ESPA radio paging connections

1

2

9

Figure notes:

3 5

4 6

PHONE LINE

POWER

7

8

cydf004 RPY 123097

1.	DCP telephone	6.	To digital line circuit pack
2.	4-pair modular cord	7.	RS-232 connector
3.	PassageWay interface	8.	ESPA radio paging equipment
4.	4-pair modular cord	9.	Loudspeaker paging system
5.	103A or modular wall jack

External ringing

Connections for external ringing are at an information outlet. The system side of the main distribution frame (MDF) is connected to a TN2183 (or equivalent) analog line circuit pack in an MCC1, SCC1, or CMC1 Media Gateway.

Note:

Up to three devices can be connected to one analog line circuit pack port.

1.Wire the ringing device to the information outlet.

2.Administer the switch for the new equipment.

354 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways