Avaya CMC1 manual Check Customer’s Order, Correcting Shipping Errors, Unpack and Inspect

Check Customer’s Order

Check Customer’s Order

Check the customer’s order and the shipping packing lists to confirm that all equipment is present. If any equipment is missing, report this to your Avaya Inc. representative. Check the system adjuncts for damage and report all damage according to local shipping instructions.

Correcting Shipping Errors

To correct shipping errors:

1.Red-tag all defective equipment and over-shipped equipment and return according to the nearest Material Stocking Location (MSL) instructions. For international customers, contact your order service agent.

2.Direct all short-shipped reports to the nearest MSL. Contact the appropriate location for specific instructions. For Streamlined Implementation in the United States, call 1-800-772-5409.

Unpack and Inspect

! CAUTION:

A fully loaded system weighs 58 lbs (26.3 kg). Use lifting precautions. If the doors, power unit, and circuit packs are removed, the unit weighs only 29 lbs (13.1 kg).

To unpack and inspect equipment:

1.Verify the equipment received. See Figure 1: Equipment Packed with the Compact Modular Cabinet on page 30. Actual equipment may vary in appearance and may ship in separate packages.

Equipment comcodes are listed in Table 4: Comcodes for CMC1 on page 31.

2.Before mounting the cabinets, remove the cabinet doors by opening them and lifting them straight up and off of the hinge pins.

Issue 10 June 2005 29