Avaya CMC1 manual Install Attendant Console Optional, Hard-Wire Bridging

Installing and Cabling the Cabinets

Figure 37: 3-Pair and 4-Pair Modularity

26	1	1	1	1
1	2	2	2	2
27	3	3	3	3
2	4	4	4	4
28	5	5	5	5
3	6	6	6	6
		7	7	7
		8	8	8

			widf3pm RPY 012098
Figure notes:
1.	Port circuit pack	5.	Output from information
2.	25-pair connector pins (3-pair modularity)		outlet (4-pair modularity)
3.	MDF pins (3-pair modularity)	6.	Voice or data terminal pins
4.	Input to information outlet (4-pair modularity)	7.	Adjunct power

Install Attendant Console — Optional

To install a DCP attendant console:

1.Position the attendant console in the desired location and connect the modular cord to the information outlet.

2.Install labels per the Attendant Console form and Display Module form assignments.

3.Install a Digital Line circuit pack in the assigned carrier slot (if required).

4.Administer the Attendant Console forms in Administrator’s Guide for Avaya Communication Manager.

Hard-Wire Bridging

! CAUTION:

Bridging or paralleling these endpoints can cause electrical damage to the consoles or cause the circuit pack to remove power from the consoles.

Analog type hard-wire bridging is not allowed for 4-wire (only) DCP endpoints. This is because hard-wire bridging provides no way of combining the digital output of 2 bridged DCP sets. Also, a bridged endpoint causes the added load to degrade the DCP signal.

92 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways