Completing Installation and Cable Pinouts

Place a Test Call

To place a test call:

1.From any telephone connected to a digital line circuit pack, call any nearby telephone connected to an analog line circuit pack.

2.Verify that the dial tone, ringing pattern, and talk path are acceptable.

3.Place a call through the Central Office (outside call) to any nearby telephone. Verify that the dial tone, ringing pattern, and talk path are acceptable.

Set Neon Voltage — Ring Ping

Note:

If the ringing option is set to 50 Hz, neon voltage is not available. If 25 Hz is selected, the maximum voltage is 120 volts. Refer to Set Ringing Option on page 76.

Note:

Set the control to OFF if there are no neon message waiting lamps or if LED message lamps are used. See Figure 68.

Figure 68: Setting the Neon Voltage

didmt1 KLC 053097

156 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways

Page 156
Image 156
Avaya CMC1 manual Place a Test Call, Set Neon Voltage Ring Ping