Avaya CMC1 manual Wiring block must be locally engineered

Install music-on-hold

4.Install patch cord/jumper wires at the MDF to connect tip and ring to the information outlet at the music source.

5.Set the Protection/Paging switch to C1.

6.Connect a modular cord from the information outlet to the music source.

7.Connect -48V to pin 5 and -48V RET to pin 2 of J3 on the 909A/B. The power source may be an 1151A, 1151A2, or other approved power supply.

8.Administer the switch for the new equipment.

Figure 115: Typical nonregistered equipment connections (auxiliary access) for an MCC1, SCC1, or CMC1Media Gateway

	J1
J2	4
	5
4
5
	J3
	5
	2

Figure notes:
1.	Customer-supplied music source	5.	Power supply for universal
2.	A25D 25-pair cable to auxiliary trunk		coupler
	circuit pack	6.	103A or modular wall jack
3.	909A/B universal coupler	7.	4-pair modular cord
4.	Part of main distribution frame	8.	Tip and ring wires

Note:

A wiring block must be locally engineered.

Issue 10 June 2005 349