Avaya CMC1 manual Converters for single-carrier cabinets, PRI-to-DASS and PRI-to-DPNSS converters

.Install ISDN converters and adapters

Converters for single-carrier cabinets

PRI-to-DASS and PRI-to-DPNSS converters

Figure 107 shows typical connections from the CCSC-1 PRI-to-DASS converter or the CCSC-2 PRI-to-DPNSS converters to the coaxial facility.

Figure 107: Typical DASS or DPNSS converter cabling

		0001 0 RBP 051396
Figure notes:
1.	To TN464GP DS1 circuit pack and either a	4.	888B coaxial converter
	CSCC-1 PRI-to-DASS converter or a CSCC-2	5.	Coaxial connection to
	PRI-to-DPNSS converter circuit pack		2-Mbps facility
2.	Communication Manager administration PC	6.	Coaxial cable from PRI
3.	RS-232 cable to front of PRI converter circuit		converter circuit pack to
	pack		coaxial converter

1.Plug the PC into the RS-232 connector on the front of the PRI converter circuit pack.

2.Connect the coaxial Y-cable from the TN464GP to the PRI converter circuit pack.

3.Connect the opposite end of the Y-cable to the 888B coaxial converter.

Issue 10 June 2005 339