Avaya CMC1 Set Country Options, System Parameters COUNTRY-OPTIONS, Tone Detection Parameters

Activate and Administer the System

●Hospitality (Basic)

●Service Observing

To check customer options:

1.Type display system-parameters customer-options and press Enter.

2.Using the customer order, ensure that the optional features purchased by the customer (as shown by PEC codes on the customer order) are enabled.

Note:

For detailed mapping of SAP material codes to DEFINITY features, capacities, release, platform, and offer category, go to the RFA website Information Page, in the Help Info section, click on the “Material Code/Feature Job Aid” link.

Set Country Options

Some country options need to be set to turn off the red alarm LEDs. To set country options:

1.Enter change system-parameters country options and press Enter. A screen similar to Figure 28 displays on the terminal. The cursor is set on the Companding Mode field.

Figure 28: Typical System Parameters Country-Options Screen

change system-parameters country-options				Page 1 of 23
SYSTEM PARAMETERS COUNTRY-OPTIONS
Companding	Mode: Mu-Law			Base Tone Generator Set: 1
440Hz PBX-dial	Tone?	n		440Hz Secondary-dial Tone? n
Analog Ringing Cadence:		1	Set Layer 1 timer T1 to 30 seconds? n
Analog Line Transmission:		1
Display Character Set:		Roman
Howler Tone After	Busy?	n	Disconnect on No Answer by Call Type? n
TONE DETECTION PARAMETERS
Tone Detection	Mode:	6
Interdigit Pause:		short

2.The default (United States) companding mode is mu-Law. If the country uses A-Law companding, type A-Law. Press Enter when finished.

Note:

Other items eventually need to be entered on this screen, but this is all that is needed to turn the red alarm LEDs off.

Issue 10 June 2005 79