Install the System Cabinets

Install Cabinet A — Wall-Mount

Figure 4: Left Panel Used as Mounting Template

To wall-mount cabinet A:

1.Place the template on the wall ensuring that the top surface is level.

2.Mark two 1/8-in. (0.3 cm) pilot holes in the mounting hole locations.

3.Remove the template from the wall.

4.Drill the two pilot holes.

5.Thread two #12 x 1-in. shoulder screws partially into the holes.

6.Set the cabinet onto the wall and align the slots with the shoulder screws. See

Figure 5: Typical Wall-Mount Installation on page 38. Slide the cabinet to the left to hold it in place. Tighten the screws securely.

Issue 10 June 2005 37

Page 37
Image 37
Avaya CMC1 manual Install Cabinet a Wall-Mount, Left Panel Used as Mounting Template