Avaya CMC1 manual Loudspeaker paging access without universal coupler

Adding or Removing Hardware

Figure 117: Connections for loudspeaker paging without paging adapter for an MCC1, SCC1, or CMC1 Media Gateway

2

5

cydfnzm KLC 091202

7

4

9

9

6

3J1

4

5

J2 7

46

53

2

J3

5

2

1

2

1

10

8

Figure notes:
1.	25-pair cable to TN763B/C/D auxiliary trunk	6.	Music source for background
	circuit pack		music over loudspeakers
2.	Loudspeaker paging system		(optional)
3.	909A/B universal coupler (if required)	7.	103A or modular wall jack
4.	Part of main distribution frame (MDF) circuits	8.	To SZ1 on TN763 connector
	1-16	9.	Tip and ring wires
5.	Paging amplifier	10.	-48 VDC power supply for 909B

Note:

On the 25-pair cable to TN763B/C/D auxiliary trunk circuit pack, SZ1 connects to GRD on key 10. The 50 points amphenol is connected to the back of a G600 or G650 Media Gateway.

Loudspeaker paging access without universal coupler

1.Determine port assignment of paging zone(s) from loudspeaker paging form.

2.At the main distribution frame, locate the connecting block and terminals assigned to the selected port.

3.On the locally engineered wiring block, place a strap between terminals S and SZ. Place a strap between terminals S1 and SZ1.

4.Install patch cord/jumper wires at the main distribution frame.

5.Connect a 2-pair line cord (modular plug at one end) from the information outlet to the paging amplifier (to the loudspeaker system).

6.Install loudspeaker equipment according to the manufacturer’s instructions.

7.Administer the switch for the new equipment.

352 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways